Orbit 62001 Mode D'emploi Et D'installation page 11

FIGURE 2
5. Remove the timer by sliding it away from the valve. Attach the automatic
5. Remove the timer by sliding it away from the valve. Attach the
automatic valve to a hose faucet tightly to avoid leaking. Make
valve to a hose faucet tightly to avoid leaking. Make sure a hose washer is
5. Remove the timer by sliding it away from the valve. Attach the
sure a hose washer is inserted in the brass swivel connector.
inserted in the brass swivel connector. [See Figure 3] automatic valve to a hose faucet tightly to avoid leaking. Make
[See Figure 3]
sure a hose washer is inserted in the brass swivel connector.
[See Figure 3]
FIGURE 3
HOSE FAUCET
HOSE WASHER
HOSE FAUCET
BRASS SWIVEL
HOSE WASHER
CONNECTOR
BRASS SWIVEL
AUTOMATIC
CONNECTOR
HOSE FAUCET
AUTOMATIC
VALVE
HOSE FAUCET
AUTO/RUN
AUTO/RUN
LOW BATTERY
LOW BATTERY
VALVE
M T W T F S S 2n d 3r d
8:00
M T W T F S S 2 n d 3 r d
8:00
PM
PM
Figure 2
Figure 2
REMOVE
TIMER
REMOVE
TIMER
Figure 3
Figure 3
10
10
PANEL COVER
PANEL COVER
TIMER
TIMER
10