Zanussi ZFC26400WA Notice D'utilisation page 20

Problem
CUSTOMER SERVICE
If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number
of your appliance which can be found either on the
guarantee certificate or on the rating plate located
on the external right side of the appliance.
REPLACING THE LAMP
WARNING! Do not remove the lamp
cover at the time of replacement. Do
not operate the freezer if the lamp
cover is damaged or missing.
1. Disconnect the mains plug from the mains
socket.
INSTALLATION
WARNING! Refer to Safety chapters.
POSITIONING
CAUTION! If you are discarding an
old appliance that has a lock or catch
on the lid, you must ensure that it is
made unusable to prevent young
children being trapped inside.
20
Possible cause
The door is not closed correct-
ly.
The products' temperature is
too high.
Many products are stored at
the same time.
The thickness of the frost is
greater than 4-5 mm.
The door has been opened of-
ten.
Products to be frozen are
placed too closely to each oth-
er.
2. Replace the used lamp with a new lamp of the
same power and specifically designed for
household appliances (the maximum power is
shown on the lamp cover).
3. Connect the mains plug to the mains socket.
4. Open the lid. Make sure that the lamp comes
on.
This appliance can be installed in a dry, well
ventilated indoor where the ambient temperature
corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
class
SN
Solution
Refer to "Closing the door".
Let the product temperature
decrease to room temperature
before storage.
Store less products at the
same time.
Defrost the appliance.
Open the door only if necessa-
ry.
Make sure that there is cold air
circulation in the appliance.
Ambient temperature
+10°C to + 32°C