Alpine iDA-X200 Mode D'emploi page 16

USB memory/Portable audio
player (iDA-X200 only)/
Changer (Optional)
iDA-X200
SOURCE Double Action
encoder
BAND
/ /ENTER
iDA-X300
SOURCE
Rotary encoder
BAND
/ENTER
/
If a USB memory device/Portable audio player (iDA-X200 only) or
changer is connected to the unit, MP3/WMA/AAC files can be played
back.
• In the USB mode, when this unit is reset, ACC is switched from OFF
to ON, or when the USB is connected to this unit, "BANKING" is
displayed for several seconds.
BANK Function (USB memory)
This unit has a BANK function that automatically divides every 1,000
songs stored in USB memory into individual banks to make searching
and playing back a song easier. A maximum of 1,000 songs for one
bank can be stored according to the order stored in USB memory. A
maximum of 10 banks (10,000 songs) can be recognized. BANK1
(songs 1 to 1,000) is set as the default. If you want to search beyond
1,000 songs, perform the following operation to select a different bank.
BANK No.
BANK1
BANK2
BANK10
1
Press PRESET.
The BANK selection mode is displayed.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only).
Select the desired BANK.
You can scroll the page by pressing and turning the Double
Action encoder. (iDA-X200 only.)
14
-EN
FUNC./SETUP
PRESET
FUNC./SETUP
PRESET
Song number
1~1,000
1,001~2,000
9,001~10,000
3
Press /ENTER.
Each operation can be performed in the selected bank.
• Even if the files are contained in the same folder, they may be saved
as different BANK.
Playback
1
Press SOURCE to select the USB AUDIO or CD
CHANGER mode.
2
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
• When a Portable audio player is connected, fast-forwarding/fast-
reversing is not available.
3
To pause playback, press
Pressing / again will resume playback.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
• "NO SUPPORT" is displayed when text information is not
compatible with this unit.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
Selecting a Disc (Changer) (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 15 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press PRESET.
The DISC CHANGE screen is displayed.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select a disc.
You can scroll the page by pressing and turning the Double
Action encoder. (iDA-X200 only.)
3
Press /ENTER.
The selected disc number appears in the display and
CD/MP3/WMA/AAC playback starts.
/ .