Technical Data - Mato pneuMATO 1 Mode D'emploi

Operating Instructions
Description:
The pneumatically operated compressed air oil delivery pumps type 1, 3 and 5 are suitable for
decanting and emptying engine, transmission and hydraulic oils.
The pumps operate fully automatically and start delivery as soon as the pressure line is opened.
The pumps are used for different areas of application corresponding to the 3 pressure ratios.
Type 1 with a pressure ratio of 1:1 for high delivery with low line resistance.
- Decanting low viscosity oils (hydraulic oils) over short distances up to around 8m.
Type 3 with a pressure ratio of 1:3 for high delivery with medium line resistance.
- Decanting and emptying oils with low and medium viscosity (hydraulic and engine oils) over
medium distances up to around 20m.
Type 5 with a pressure ratio of 1:5 for high delivery with high line resistance.
- Decanting and emptying oils with medium and high viscosity (engine and gear oils) over long
distances above 20m.
Waste oils must only be pumped if they do not contain any solid particles
Any other use, or modification or alteration to the pump or the equipment is only permissible
after discussions with the manufacturer.

Technical Data:

Type of pump
Pressure ratio
Max. delivery pressure
at 8 bar air supply
pressure.
Max. delivery with free
outflow
Air pressure min./max.
Sound level:
( EN ISO 3744 )
Thread
Air connection
Oil outlet
Oil inlet
Dimension A
Dimension B
Dimension C
Dimension D
Dimension E
Weight
6
1 3
1:1 1:3
8 bar 24 bar
ca. 25 l/min ca. 18 l/min
3 – 8 bar 3 – 8 bar
ca. 85 ca. 85
dB(A)
Rp ¼" Rp ¼"
R ½" R ½"
Rp ¾" Rp ¾"
78 mm 78 mm
290 mm 285 mm
75 mm 60 mm
53 mm 53 mm
33 mm 33 mm
3,6 kg 3,5 kg
5
1:5
40 bar
ca. 17 l/min
3 – 8 bar
ca. 85
dB(A) dB(A)
Rp ¼"
R ½"
Rp ¾"
94 mm
295 mm
60 mm
53 mm
33 mm
4,4 kg
/ English