Specifications; Staple Selection - Hitachi N 5008AB Mode D'emploi

English

SPECIFICATIONS

Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet

STAPLE SELECTION

Only staples shown in the Table below can be driven with this Stapler.
N5008AB
16 Gauge
Min.
1.45mm
7.9mm
(.057")
(.309")
N5008AB
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14 - 7/16" × 9 - 5/8" × 2 - 3/4"
(367 mm × 244 mm × 70 mm)
5.5 lbs. (2.5 kg)
156 Staples
.046 ft 3 /cycle at 100 psi
(1.3 ltr/cycle at 6.9 bar)
(1.3 ltr/cycle at 7kgf/cm
Dimensions of staples
7/16" Crown
Max.
— 8 —
9 - 23/32" × 8" × 2 - 7/32"
(247 mm × 203 mm × 56 mm)
.032 ft
(.9 ltr/cycle at 6.9 bar)
2
) (.9 ltr/cycle at 7kgf/cm
3/8" NPT Thread
N3804AB
18 Gauge
Min.
3.5mm 1.08mm
(.138") (.043")
N3804AB
2
)
2.9 lbs. (1.3 kg)
125 Staples
3 /cycle at 100 psi
2
)
1/4" Crown
Max.