Set All/Direct Call; Set All Call; Set Direct Call - Motorola TLKR T7 Manuel De L'utilisateur

Set All/Direct Call

Press key in Group Mode to enter All/Direct Call Setting.
At first the user selects a type of Call from All Call
transmission or Direct Call Setting.
All Call Transmission
To select this setting, press the
type of Call.

Set All Call

When "All Call Transmission" is selected, press
SEL/ key to exit from this setting, and transmit All Call
immediatley.
Then it sounds All Call Tone.
The display shows TX icon and Call icon blinks while
transmitting.
Press the MENU/GRP key to go back to Idle status.
Note:
12
Direct Call Setting
or key to select a
key or

Set Direct Call

The display shows ID Number on Channel segments and
ID Name blinks on Sub Code segments.
Press the key or key to select an ID Number.
Press key or SEL/ key to transmit Direct Call
command.
Then the user transmits Direct Call command to only the
selected ID.
The display shows TX icon and Call icon while transmitting.
The unit sounds the selected Call Tone while transmitting
Direct Call command.
Press the MENU/GRP key to go back to All/Direct
Note:
Call setting.
The ID Number for
Direct Call
The ID Name