Improper Use; Personnel Qualification - WIKA CPP700-H Mode D'emploi

3. Safety
This instrument is not permitted to be used in hazardous areas!
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
EN
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
Handle the test pump with the required care (protect from humidity, impacts, strong
magnetic fields, static electricity and extreme temperatures, do not insert any objects into
the instrument or its openings). Plugs and sockets must be protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.

3.3 Improper use

WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and injuries.
▶
▶
▶
Any use beyond or different to the intended use is considered as improper use.

3.4 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to
equipment.
▶
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel who,
based on their technical training, knowledge of measurement and control technology and
on their experience and knowledge of country-specific regulations, current standards and
8
Refrain from unauthorised modifications to the instrument.
Do not use the instrument within hazardous areas.
Do not use the instrument with abrasive or viscous media.
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
WIKA operating instructions, models CPP700-H and CPP1000-H