Functional Description - Milwaukee 2475-20 Manuel De L'utilisateur

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behavior resulting in fire, explosion or

risk of injury.

• Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or temperature

above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging im-

properly or at temperatures outside the specified range

may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

INFLATOR

• Do not use this tool for purposes other than inflating

items such as car tires, bike tires, lawn equipment

tires, sports equipment, air mattresses, beach toys

and other inflatables. Use of the tool for operations

different from those intended could result in a hazard-

ous situation. Do NOT use this tool to fill air tanks or

shocks. Do NOT use this tool as a breathing device.

Do NOT use this tool to spray chemicals.

• Do not leave the tool unattended during operation.

•Risk of Bursting. Do not overinflate. Follow all

manufacturer's instructions for the item. Do not

set the tool to an output pressure greater than marked

maximum pressure of item to be inflated.

• Use only recommended MILWAUKEE inflator ac-

cessories. Others may be hazardous.

• Never block or plug the air outlet during operation.

• Never carry tool by the air hose. Damage may occur.

•Check air hose for wear or damage before each

use. Check all accessory connections are secure.

Repair all damaged parts before use. Contact a

MILWAUKEE service facility for ALL repairs.

•

Allow tool to cool for 10 minutes after

CAUTION

each 10 minutes of continuous use.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

Read Operator's Manual

Wear Eye Protection

UL Listing for Canada and U.S.

SPECIFICATIONS

Cat. No. .....................................................2475-20

Volts..............................................................12 DC

Battery Type ................................................ M12™

Charger Type............................................... M12™

Maximum Pressure....120 PSI, 8.27 BAR, 827 kPa

Output .......................................0.88 CFM @ 0 PSI

Recommended Ambient

Operating Temperature ..................... 0°F to 125°F