Important Safety And Installation Instructions - KETRON SD2 Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
Owner's Manual
SAFETY INSTRUCTIONS
INSTRUCTIONS ABOUT RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS
Warning: to reduce the risk of fire or electric shock, do not expose this instrument to rain or
moisture.
- Earthing instructions -
This product must be connected to an earthed outlet. In case of malfunctioning, the earthing
will reduce the risk of electric shock. The instrument comes with an earthed power cable and
plug to be used with an earthed outlet.
DANGER - Improper earthing connections may cause electric shocks. In case of doubts, have
your electric installation checked by a qualified electrician. Do not modify the power cable
coming with the instrument.

IMPORTANT SAFETY AND INSTALLATION INSTRUCTIONS

WARNING - When using electrical products, some basic precautions must be followed, including the following:
Before using this instrument, carefully read the User's Manual.
When the instrument is used by children, the presence of an adult is required.
Do not use the instrument near water, for example near a wash-basin, a swimming-
pool, a wet surface, etc.
The instrument must be used only on supports recommended by the manufacturer.
Do not use the instrument where there is any risk of it getting splashed with water or of water
dripping on it, such as near wash basins, swimming pools or on wet surfaces etc. Do not put
containers with water on top of the instrument.
The instrument is to be used in a position where adequate ventilation is provided.
Use the instrument far away from heat sources such as radiators, heaters, etc.
Use only the supplied power cable for connecting the instrument to the mains.
The identification and power supply data are reported on the bottom of the instrument.
Disconnect the power cable if the instrument is not used for longer periods of time.
If you need to disconnect the instrument from the power supply, use the ON/OFF switch at the back
of the instrument.
The instrument must be positioned so that the ON/OFF switch is easily accessible.
Bring the instrument to an service centre in the following cases:
a. Damages on the power cable or plug.
b. Objects or liquids fallen into its inside.
c. The instrument has been exposed to rain.
d. Abnormal running or an evident decrease of the instrument's performance.
e. The instrument has fallen down or the enclosure has been damaged.
Never try to repair the instrument yourself. All operations must be performed by specialised
engineers.
KEEP THESE INSTRUMENTS IN A SAFE PLACE
GB
13

Publicité

Table des Matières
loading

Table des Matières