6.1
Service
The complete system must be serviced at regular intervals (approximately every 3 to 4 months). For
every service all of the threaded connections must be checked for leaks. Also the condition of the function
of the float valve for the back-up tank must be checked. If the system has been out of use for a long
period or there has been the danger of frost then the pump and controlmatic should be emptied. Any
temporary storage should only be at a dry and well ventilated location.
6.2
Care
For care and cleaning of the system it is sufficient to use a damp cloth, for more thorough cleaning a mild
detergent may also be used. Under no circumstances should a solvent or cleaning agents containing
solvents be used.
info@graf.info
www.graf.info
6.
Service and care
Emptying plug
24 / 50