Whirlpool GLADIATOR EZ CONNECT Instructions D'assemblage page 6

7.
Add top post
Insert top post (P2) into bottom post (P1) until
you hear a click. Then build the 4th section of
the shelving unit.
NOTE: Posts may appear loose until completion of Step 8.
9.
Assemble 5th shelf
Recommend adding next section at notch 28 from the bottom
of the post. Add the horizontal and side support beams. Add
tie channel support and shelf.
11.
Move shelving
Using 2 people, move rack shelving to final location.
6
8.
Assemble 4th shelf
Recommend adding next section at notch 21 from the bottom
of the post. Add the horizontal and side support beams. Add
tie channel support and shelf.
10.
Check all beams and tie channels
Verify that all beams and tie channel supports are properly
assembled.