GreenWorks Commercial 2003807 Manuel D'utilisation Et De Sécurité page 3

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
or medication. A lapse of attention
while operating power tools may result
in serious personal injury.
„ Use personal protective equipment.
Always wear
Protective equipment such as dust
mask, non-skid safety shoes, hard hat
or hearing protection used appropriately
will reduce personal injuries.
„ Prevent unintentional
Ensure the switch is in the off
position before connecting to power
source and/or battery pack and
when picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energizing power tools that
have the switch on invites accidents.
„ Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may result
in personal injury.
„ Do not over-reach. Keep proper
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
„ Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery
or long hair can be caught in moving
parts.
„ If devices are
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
POWER TOOL USE AND CARE
„ Do not force the power tool. Use the
power tool for the application. The
correct power tool will do the job better
and safer at the rate for which it was
designed.
„ Do not use the power tool if the
switch does not turn it on and off.
English (original instructions)
eye protection.
starting.
provided for the
Any power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
„ Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
„ Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
„ Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
„ Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
„ Use the power tool, accessories and
tool bits etc.in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
BATTERY TOOL USE AND CARE
„ Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
„ Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
„ When battery pack is not in use, keep
2