Operating And Display Elements - Dometic CoolFreeze CDF11 Notice D'utilisation

CoolFreeze CDF11
5.2

Operating and display elements

Control panel (fig. 2, page 3)
Item Description
1 On/Off button
2 POWER
3 ERROR
4 SET
5 Display
6 +
7 –
EN
Explanation
Switches the cooler on or off when the button is pressed for
between one and two seconds
Status indication
LED lights up green
LED lights up orange
LED flashes orange
LED flashes red
Selects the input mode
•
Set Temperature
•
Set temperature unit (Celsius or Fahrenheit)
•
Set battery monitor
Shows the temperature inside the cooling compartment
The first three digits of the four-digit display show the
temperature, the fourth digit shows the temperature unit
(°C or °F).
In case of an error the display shows the error message
"Err1" or "Err2".
Press once to increase the value
Press once to decrease the value
Technical description
Compressor is on; preset
temperature isn't reached
yet
Preset temperature is
reached
Insufficient voltage
Device is switched on but
not ready for operation
11