Vertical Steam Ironing; Refi Lling The Water - SilverCrest SDBS 2200 A1 Mode D'emploi

NOTE
To switch to dry ironing while you are steam ironing, press the boiler button
to release it. The "Iron dry" indicator
boiler button
You can now iron without steam.
♦ After ironing, place the iron
temperature control
♦ Press the boiler button
the boiler button
♦ Press the on/off button
To avoid tripping hazards, place the connecting hose
provided, pull the main plug out of the socket and press the cable retractor
button
♦ To fi x the iron
into the
the iron handle
the holder

Vertical steam ironing

♦ Hang the item to be ironed on a coat hanger that you hold fi rmly in one
hand.
♦ Hold the iron
steam blast button
♦ Touch the fabric lightly with the soleplate
♦ Press the Steam stop button
Refi lling the water
NOTE
As soon as the "Water tank empty" indicator
water. See the section "Filling the water tank".
♦ Put the iron
♦ Refi ll the water as described in the section "Filling the water tank".
SDBS 2200 A1
and then, a little later, the "Steam ready" indicator
on the stand of the base station
to "MIN".
to deactivate steam ironing mode. The indicator in
goes out.
to switch off the appliance. All indicators go out.
.
back onto the base station
position. Then you can carry the appliance in just one hand using
if you have previously placed the connecting hose
provided (to avoid a tripping hazard).
in a vertical position with the other hand and press the
.
to stop the steam output.
on the stand of the base station
will light up and the indicator in the
in the holder
push the catch release
to remove creases.
lights up, you must add more
.
GB
IE
go out.
. Set the
in
15