Removing And Replacing The Compensation Box Covers; Figure 4- 6: Removing The Compensation Box Covers - Tektronix P6245 Manuel D'utilisation

Maintenance

Removing and Replacing the Compensation Box Covers

Follow these steps to open the compensation box.
1. Press the optional release tool pins into the compensation box
cover catches and gently lift the cover off a small distance. Refer
to Figure 4- - 6.
2. Hold the open edge apart, and use the tool to open the other side
of the compensation box.
3. With both sides of the box open, gently separate the two halves of
the compensation box.

Figure 4- 6: Removing the Compensation Box Covers

4- 14
Cover
Catches
P6245 Instruction Manual