Declaration Of Performance; Declaration Of Conformity - Hornbach 6828262 Manuel D'installation Et De L'utilisateur

Declaration of performance

DOP 68282621-CPR, Version: 20181030
1. Unique identification code of product type:
Pergola Awning 3.94 x 3.94
2. Type, batch or serial number or other label for the
identification of the product referred to in Article
11 / Paragraph 4:
6828262
3. The manufacturer's intended use or intended uses
of the product in accordance with the applicable
harmonized technical specification:
Application in the exterior of buildings and other
structures
4. Name, registered trade name or registered trade
mark and contact address of the manufacturer in
accordance with Article 11 / Paragraph 5:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim/Germany
www.hornbach.com
5. Where appropriate, the name and contact address
of the authorized representative, responsible for
the tasks referred to in Article 12 / Paragraph 2:
Not relevant
6. System or systems for the assessment and verifica-
tion of the reliability of performance of the product
according to Annex V of the Construction Products
Directive:
System 4
7. Not relevant (for System 4 there is no notified
body).

Declaration of conformity

Hereby, HORNBACH Baumarkt AG declares that the
radio equipment type "remote control" is in compli-
ance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
internet address:
www.hornbach.com/productcompliance
8. Not relevant.
9. Declared performance
Main features Performance
Resistance to Class 2
wind loads
Total energy NPD
dissipation g
tot
10. The performance of the above product corresponds
to the declared performance/s as defined in No. 9.
The above manufacturer is solely responsible for
the preparation of the service declaration in accord-
ance with Regulation (EU) No. 305/2011.
Signed for the manufacturer and on behalf of the man-
ufacturer by:
Andreas Back
Head of Quality Management, environment & CSR
Person authorised to compile the technical file
Bornheim, 25.10.2018
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Harmonized techni-
cal specification
EN 13561
ENGLISH | 181