Functional Description - Bosch PSM VENTARO 1400 Instructions D'emploi

OBJ_BUCH-2 609 932 412-001.book Page 2 Thursday, January 13, 2005 12:48 PM
c) Do not vacuum hot or burning dusts. Do
not operate the vacuum cleaner in hazard-
ous locations. The dusts or vapours can ignite.
d) Do not use the vacuum cleaner when the
mains cable is damaged. Do not touch the
damaged cable and pull the mains plug
when the cable is damaged while working.
Damaged cables increase the risk of an electric
shock.
e) Connect vacuum cleaners that are used in
the open via a residual current device
(RCD).
f) Do not vacuum materials that are harmful
to one's health, e. g., asbestos. Asbestos is
considered carcinogenic.
g) Have the vacuum cleaner repaired only
through qualified specialists and only
using original spare parts. This ensures that
the safety of your vacuum cleaner is maintained.

Functional Description

Read all instructions. Failure to fol-
low all instructions listed below may
result in electric shock, fire and/or seri-
ous injury.
Intended Use
Multi Sander
The machine is intended for dry sanding and polishing
of wood, filler and coated surfaces. It is especially suit-
able for profiles, corners or hard to reach locations.
Vacuum Cleaner
The vacuum cleaner is intended to vacuum/extract and
blow out non-hazardous materials.
Machine Elements
The numbering of the machine elements refers to the
illustration of the machine on the graphics page.
1 Multi sander
2 On/Off switch of the sander
3 Vacuum hose
4 Vacuum cleaner
5 Latch of the vacuum cover
6 Carrying handle
7 On/Off switch of the vacuum cleaner
8 Vacuum hose connection
2 609 932 412 • 13.1.05
9 Plug cap for the vacuum hose connection
10 Holder for blower adapter/closing cover
11 Adapter for blower connection
12 Closing cover with blower filter
13 Cable reel
14 Vacuum lid
15 Bypass valve
16 Closing flap for dust bag enclosure
17 Guide for dust bag
18 Dust bag
19 Drilling helper
20 Extraction adapter, Ø 35 mm
21 Extraction/inflation nozzle
22 Vacuum hose connection of the multi sander
23 SDS button for release of the sanding plate
24 Sanding plate
25 Sanding sheet
26 Pad extender*
27 Sanding plate for extender*
28 Narrow pad extender*
29 Narrow rounded pad extender*
*Not all of the accessories illustrated or described are
included as standard delivery.
Tool Specifications
Air-driven multi sander
Article number
No-load speed
Orbital stroke rate
Sanding sheet surface
Orbit diameter
Vacuum cleaner
Article number
Rated power input
Dust bag contents
Weight according to
EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of your
multi sander or vacuum cleaner. The trade names of individual
machines may vary.
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
English–2
PSM VENTARO
1400
PSM VENTARO
2 607 219 0..
rpm 16000
opm 32000
2
cm 104
mm 1,6
VENTARO 1400
3 603 C41 0..
W 1250
l 3
kg 5.6
/II