EN
6.2
UNFOLD THE LOWER HANDLE
3
1. Pull and turn the handle knobs 90°.
2. Unfold the lower handle.
3. Line up the handle knobs in one of the three
positions on the brackets.
4. Turn the handle knobs 90° until they engage the
holes in the brackets.
Make sure that the two handle knobs are in the same
position.
Do not damage or pinch the cables when you fold or
unfold the handle.
6.3
INSTALL THE UPPER HANDLE
5
4
1. Align the holes in the upper handle and the lower
handle.
2. Put the bolts through the holes.
3. Tighten the knobs onto the bolts.
4. Do the same operation on the other side.
1
NOTE
WARNING
5
English
6.4
INSTALL THE GRASS CATCHER
8
1. Remove the mulch plug.
2. Open the rear discharge door and hold it.
3. Hold the the grass catcher by its handle and engage
the hooks on the slots.
4. Close the rear discharge door.
6.5
INSTALL THE MULCH PLUG
8
8
7
1. Remove the grass catcher.
2. Open the rear discharge door and hold it.
3. Hold the mulch plug by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
6.6
SET THE BLADE HEIGHT
The machine can be set to different blade heights.
1. Pull the height adjustment lever rearward to
increase the blade height.
2. Pull the height adjustment lever forward to decrease
the blade height.
8
20
6
9
11