EN
Problem
The machine
does not start.
The machine
cuts grass un-
evenly.
The machine
does not mulch
correctly.
The machine is
hard to push.
There is a high
vibration in the
machine.
Possible cause
Solution
The battery ca-
Charge the bat-
pacity is low.
tery pack.
The bail switch is
Replace the bail
defective.
switch.
The battery key
Put in the battery
is not put in.
key.
The lawn is
Examine the
rough.
mowing area.
The blade height
Move the wheels
is not set cor-
to a higher posi-
rectly.
tion.
Wet grass clip-
Wait until the
pings attach to
grass dries be-
the deck.
fore mowing.
The mulch plug
Install the mulch
is missing.
plug.
The grass is too
Increase the
tall, or the blade
blade height.
height is too low.
The grass catch-
Empty the grass
er and the blade
clippings from
drags in thick
the grass catch-
grass.
er.
The blade is un-
Replace the
balanced and
blade.
worn.
The engine shaft
1. Stop the en-
is bent.
gine.
2. Remove the
safety key
and battery
pack.
3. Disconnect
the power
source.
4. Inspect for
damage.
5. Repair the
machine be-
fore you start
it again.
English
Problem
The machine
stops during
mowing.
* If you cannot find the solution to these problems, go to
the service center.
10
TECHNICAL DATA
Voltage
No load speed
Height adjustments
Self-propelled speed
Functions
Weight (without battery
pack)
Battery model
Charger model
Double-insulated con-
struction
11
LIMITED WARRANTY
YEAR/ANS/AÑOS
TOOL WARRANTY
GARANTIE DE
L'OUTIL
HERRAMIENTA
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period of
four (4) years against defects in materials, parts or
workmanship. Greenworks, at its own discretion will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
12
Possible cause
Solution
The blade height
Increase the
is too low.
blade height.
The battery pack
Charge the bat-
is out of power.
tery pack.
The grass clip-
Remove the bat-
pings attach to
tery pack and
the deck or the
check the deck.
blade.
Operation tem-
Cool the ma-
perature of the
chine.
machine is too
high.
82 V
4000 RPM
1 3/8 - 3 3/4" (3.5 - 9.5
cm)
1.6-4.8 fps. (0.5-1.5 m/s)
2-in-1: Mulching & Rear
Bagging Capabilities
32.5 kg
GL 500 and other BAB
series
GC 400/2907302 and
other CAB series