Technical Data; Before Starting The Equipment - EINHELL TC-JS 85 Instructions D'origine

4. Technical data

Mains voltage: ............................... 230 V ~ 50 Hz
Power consumption: .................................. 620 W
Stroke speed: ............................800 - 3,000 min
Stroke height: ........................................... 20 mm
Cutting depth, wood: ................................ 85 mm
Cutting depth, plastic: .............................. 12 mm
Cutting depth, iron: ..................................... 8 mm
Miter cut: ........................ up to 45° (left and right)
Protection class: ...........................................II /
Weight: .......................................................2.1 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ........................ 90 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 101 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Cutting wood
Vibration emission value a
K uncertainty = 1.5 m/s
Cutting sheet metal
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Anl_TC_JS_85_SPK9.indb 20 Anl_TC_JS_85_SPK9.indb 20
-1
= 11.0 m/s
2
h
2
= 9.3 m/s
2
h
2
- 20 -
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
5.1 Safety guard (Fig. 2/Item 15)
•
The safety guard (15) protects the user from
accidentally touching the saw blade (12) but
still gives you an unobstructed view of the
cutting area.
•
The safety guard (15) must always be fitted
when carrying out cutting work.
•
The safety guard can be removed for carrying
out adjustments.
24.04.2019 06:51:17 24.04.2019 06:51:17