Abus Secvest FUMK50031W Instructions D'installation Et D'utilisation page 17

Operating frequency,
wireless
Transmission power,
wireless
Range, wireless
Type of detection
Standards for intrusion
and panic button devices
Conformity
EU Directives
General
Functional principle and features
General
The FUMK50031W is a wireless magnetic contact for doors and windows. It was designed to oper-
ate together with 868 MHz narrow band receivers from ABUS. The FUMK50031W consists of two
components: the sensor (usually installed on the door frame or window frame) and the magnet. If
the door or the window is opened, the two components are separated. This information is then
transmitted to the respective alarm panel or receiver component. This triggers a corresponding
alarm.
Main features
 Narrow design for particularly small installation
proportions
 Reliably detects opening of windows and
doors.
 Magnet can be mounted on the right or the left
 Wide range
 Impact-resistant construction
Compatible equipment
The Secvest Small Wireless Magnetic Contact FUMK50031W is compatible with:
Alarm panels
868.6625 MHz narrow band
max. 10 mW
max. 500 m range outdoors
approx. 30 m indoors (depending on building structure)
Reed contact as sensor for magnetic field
Intrusion Standard: EN 50131-2-6; Certification body: Telefication
Third-party verification of compliance was carried out by Telefica-
tion.
RED: 2014/53/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
WEEE: 2012/19/EU
ErP: 2009/125/EU
Low Voltage: 2014/35/EU
General Safety: 2001/95/EC
This product must be installed by a qualified service engineer.
Functional principle and features
 Tamper monitoring
 Cover and wall tamper contact
 Simple installation
 Supervision
 Monitors voltage
Components
17 | EN