Publicité
Les langues disponibles
Les langues disponibles
OPERATION OF USE
7. a. Press the switch « ON / OFF VACUUM », the suction is activated.
Repeat the process, the suction function is disabled;
b. Select the steam volume according to your needs; the indicator
remains lit fixedly after 17 seconds (At the first use, the steam
function must be kept activated for 17 seconds), indicating that the
steam function is ready. At this point, the steam function can be
used by holding down the steam flow trigger located under the
handle;
c. Press the high flow steam switch or low flow, while holding down the
steam flow trigger. The high flow steam function or low-flow starts.
Release the switch handle, the steam function will stop, again press
the steam switch, steam is turned off.
Note:
Steam function: can be used simultaneously with the vacuum
function separately or as a steam cleaner only.
Suction function: may be used simultaneously with the steam
function separately or as a vacuum only.
ON / OFF VACUUM
LOW FLOW STEAM
HIGH FLOW STEAM
INDICATOR LIGHT
EN-10
STEAM FLOW TRIGGER
Publicité
