Operating Controls - VOLTCRAFT PS-1305-230 Notice D'emploi

Operating Controls

(see figure on the fold-out page)
(1) DC current limiter control (AMPERE = unit of el. current)
(2) DC current display "AMPERE"
(3) DC status displays:
(4) DC voltage display "VOLT"
(5) DC output voltage control (VOLT = unit of el. voltage)
(6) AC current display "AMPERE"
(7) AC voltage display "VOLT"
(8) AC output voltage control
(9) Mains/input fuse (melting fuse)
(10) Fastening apertures for rack systems
(11) Power switch for putting the device into operation (I=ON / 0=OFF)
(12) Circuit breaker for AC output
(13) Potential-free AC socket (no grounding contacts)
(14) Fixed voltage output 5VDC, (positive potential = red "+", negative potential = blue "-")
(15) DC-output adjustable (plus pole = red "+", minus pole = blue "-" ground potential = yellow/green)
(16) Carrying handles
(17) Grounded low-power connection for mains cable
(18) Input selector switch for mains voltage. Attention! In Europe only 230 V!
(19) Device fan. Do not cover!
(20) Rear DC control output (terminal screw clamp)
(21) Rear DC fixed voltage output (terminal screw clamp)
(22) Ground potential. The connection is directly connected with the grounding conductor on the
mains plug.
"CC" (Current limitation/constant current operation),
"CV" (Constant voltage operation)
17