Télécharger Imprimer la page

SEVERIN BA-3285 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Steam Generator
Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1.
Flexible connecting hose with swivel-
type sleeve support
2.
Iron
3.
Temperature control (adjustable)
4.
Base stand (rear)
5.
'Water refill' indicator light
6.
Steam indicator light
7.
Power cord with plug
8.
On/Off switch with indicator light - iron
9.
On/Off switch with indicator light -
boiler
10. Rating label (underneath steam
generator)
11. Safety valve on underside of steam
generator
12. Sole plate
13. Power cord storage
14. Water reservoir with anti-scale filter
15. Iron rest (on steam generator)
16. Steam nozzle
17. Steam button
18. Steam regulator
19. Temperature indicator light - iron
20. Handle
Important safety instructions
Remove any packaging materials from
the appliance.
Before the appliance is used, the main
body including the power cord as well as
any attachment fitted should be checked
thoroughly for any defects or leakage.
Should the appliance, for instance, have
been dropped onto a hard surface, it
must no longer be used: even invisible
damage may have adverse effects on the
operational safety of the appliance.
The power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive
strain has been put on the connecting
hose or the power cable. Damage cannot
always be detected from the outside; the
entire unit should therefore be checked
by a qualified technician before it is used
again.
Always place the appliance on a flat,
level and heat-resistant surface during
operation. Do not position the appliance
on or near hot surfaces or open flames
such as hot-plates or gas flames.
Great care is necessary when using any
appliance, especially near children. Do
not leave the appliance unattended while
connected. Always remove the plug from
the wall socket and place the iron back
on the iron rest on the steam generator.
When ironing is interrupted, the
appliance must be replaced onto the iron
rest on the steam generator.
The iron must be used and stored on a
stable and durable surface only.
With the iron placed on its rest on the
steam generator, ensure that this too is
on a stable and durable surface.
Never open the safety valve in the
bottom of the steam generator unless the
appliance has completely cooled down
(around 2 hours).
Caution: the connecting hose can
become very hot during ironing.
The appliance operates at very high
temperatures. Do not touch any part of
the appliance except the handle. Burns
can occur from touching the hot parts of
9

Publicité

loading