Wagan Tech Mighty Impact Wrench Guide D'utilisation page 6

Mighty Impact Wrench
Replacing the Fuse in the 12V Adapter
1. Twist off the upper cover of the 12V adapter tip.
2. Remove the faulty fuse.
3. Insert a new fuse of the same type (spare fuses are included in the case)
4. Twist the cover back onto the Adapter.
Troubleshooting
Problem
The Mighty Impact
Wrench will not start
A wheel nut cannot be
unscrewed or tightened
Specifications
Voltage
Power Draw
No Load Speed
Max Torque
Fuse Rating
Square retainer diameter
Included Socket Diameters
5
by Wagan Tech
™
Possible Solution
Check if the vehicle battery is dead
Check if the 12V socket is faulty
Check the fuse in the 12V Adapter of the wrench
Check that the correct rotation direction has been
selected
12V DC
8 Amp
5000 RPM max
271 ft-lb
15A, 250V
1/2" (12.7 mm)
11/16", 3/4", 13/16", 7/8"
(17/19 mm, 21/23 mm)
www.wagan.com
®