Atag OX9570G Mode D'emploi page 63

USE
P
A
U
T
O
A
P
A
U
T
O
A
You can check the time remaining on the clock timer whenever you
wish by holding the 'time button' (A) in for a few moments till the
'clock symbol' starts flashing. You can then change the time selected
by pressing the '–' or '+' buttons. You will hear a beep confirming the
change.
Setting a baking time
1. Hold the 'time button' (A) in for a few moments till you hear a
beep. If the 'time button' (A) is then pressed again, the word 'time'
appears in the display.
2. Set the baking time using the '–' and '+' buttons.
You will hear a beep, the current time appears and the 'AUTO'
symbol stays lit. When the baking time has elapsed, the oven will
switch off automatically.
3. Set a baking function and temperature.
After the baking time has elapsed, the oven is switched off and an
acoustic signal goes off.
4. Press any key to switch off the acoustic signal.
The oven remains switched off and the 'AUTO' symbol flashes.
5. Hold the 'time button' (A) in for a few moments till you hear a beep
to end the function. Turn the oven function knob and temperature
knob to the 'off position' to switch the oven off.
You can check the baking time remaining whenever you wish by
holding the 'time button' (A) in for a few moments till the 'AUTO' symbol
starts flashing. You can then change the baking time by pressing '–' or
'+' buttons. You will hear a beep confirming the change.
Hold the 'time button' (A) in for a few moments to end the baking
time function.
Setting an end time
1. Hold the 'time button' (A) in for a few moments till you hear a beep.
2. Press the 'time button' (A) again till the word 'End' appears in the
display.
3. Set the end time using the '–' and '+' buttons.
You will hear a beep, the current time appears and the 'AUTO'
symbol stays lit. When the end time is reached, the oven will switch
off automatically.
EN 9