Domo DO7286S Mode D'emploi page 27

PARTS
1. Floor nozzle
2. Button to pull out or retract brushes
3. Telescopic tube
4. Slide button to set length of tube
5. Flexible hose
6. Coupling of flexible hose
7. Dust container
8. On/off button
9. Air outlet filter: HEPA
10. Cord rewinding button
11. Connection for hose
8
9
10
ASSEMBLY
Always unplug the vacuum cleaner before (dis)assembling any parts.
HOSE
· Assembly: Push the coupling of the flexible hose into the connector hole until you hear it
click.
· Disassembly: Pull the plug from the outlet. Push the button at the top of the coupling and
remove the hose from the connector hole.
TELESCOPIC TUBE
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. To do this, push the slide button forward
and pull out the bottom part of the tube to make it longer. Release the slide button and
let the tube snap into place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
1
www.domo-elektro.be
5
6
11
2
4
7
3
2
1
3
DO7286S
27