Maintenance And Cleaning; Battery Recycling Program - Bosch Nyon BUI350 Mode D'emploi

Masquer les pouces Voir aussi pour Nyon BUI350:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN-30
Code
Cause
602
Internal battery fault
603
Internal battery fault
605
Battery temperature error
606
External battery fault
610
Battery voltage error
620
Charger fault
640
Internal battery fault
655
Multiple battery faults
656
Software version error
7xx
Error relating to third-party compo-
nents
Display is
Internal fault of the on-board com-
blank
puter
Bosch eBike Systems
Corrective measures
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
The battery is outside of the permissible temperature
range. Switch off the eBike system and allow the battery to
either cool down or heat up to the permissible temperature
range. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Check the wiring. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Replace the charger. Contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Switch off the eBike system. Remove the battery pack and
reinsert it. Restart the system. If the problem persists,
contact your Bosch eBike dealer.
Contact your Bosch eBike dealer so that they can perform
a software update.
Observe the information in the operating instructions of
the respective component manufacturer.
Restart your eBike system by switching it off and back on.
1 270 U20 BN2 | (19.05.2020)
English – 29
English – 30
Deactivate the on-board computer if you are car-
u
rying out cleaning, maintenance or servicing
work on the holder or the on-board computer.
Only then malfunctions/misuse can be avoided.
Do not clean any of the components with pressurized
water.
Keep the screen of your on-board computer clean.
Dirt can cause faulty brightness detection.
Clean your on-board computer using a soft cloth
dampened only with water. Do not use cleaning prod-
ucts of any kind.
Have your eBike system checked by an expert at least
once a year (including mechanical parts, up-to-date-
ness of system software).
The bike retailer can also schedule the service based
on a mileage and/or a time period. In this case, the
on-board computer displays a message telling you
when the service date is due each time it is switched
on.
Please have your eBike serviced and repaired by an
authorized bicycle dealer.
Only have repairs performed by a certified bicy-
u
cle dealer.
The drive unit, on-board computer incl.
operating unit, battery, speed sensor, ac-
cessories and packaging should be dis-
posed of in an environmentally correct
manner.
Do not dispose of eBikes and their components with
household waste.
You may recycle your Bosch battery
pack by calling 1.800.822.8837.
1 270 U20 BN2 | (19.05.2020)

Maintenance and cleaning

Battery Recycling Program

EN-31
English – 31
Bosch eBike Systems

Publicité

Table des Matières
loading

Table des Matières