afx light HAZE 700 Manuel D'utilisation page 4

5) CONT BUTTON
This button is used to select CONT mode. In this mode, the haze machine sprays haze in continuous mode.
The volume of haze is set with the output control (3). When you push this button, CONT led lights on. Push
another time this button to disable this function
6) MANUAL BUTTON
This button is used to select manual mode. Press this button to sprays 100% of volume all the time you hold
the button. When you hold off the button, the spray of haze stops.
DISPLAY
There are three pages under the digital play to set the DMX address, haze output and fan speed.
When the machine is heating up, the lines in the segment display would move from bottom to top. Also the fluid tank
would be red. When ready, it should show three lines together,the fluid tank would turn blue.
DMX ADDRESS
When the three lines are light up together, the value flowing is matched with the DMX address. User can adjust the
DMX address through the up and down button.
HAZE OUTPUT
When the display presents three lines in the first segment, two lines in the second segment, and one line the the
third segment, it last value represents the haze output.There are five levels in total.
FAN SPEED
When all the first three segments shows three lines, the last value represents the wind output. Also there are five
levels.
© Copyright LOTRONIC 2014 HAZE-700 Page 4