Technical Specifications - Salvis Master Herd Mode D'emploi

6.

Technical specifications

Technical specifications
Item no.
Category
Type of gas appliance
Overall nominal heat input
Anschlusswert Stadtgas
Connection value for liquefied
gas
Connection value for natural gas
Gas connection diameter
We reserve the right to make technical changes!
. Remove protective foil from appliance.Remove adhesive residues with cleaning or washing­
benzene.
7. Switch over to another gas family
Observe the notes regarding safe operation, see page 19 Chapter 1.
D Natural gas E is the standard factory setting of the gas oven.
D Only use original nozzles for switching over to other gas families.
. After switching over to another gas family and after maintenance work
− Check all gas-bearing parts for tightness (leak spray),
− Attach sticker over gas family and gas primary pressure (mbar) on the gas oven.
. Record all data required for the switch-over, according to the nozzle table / overview, see
page 14 Chapter 7.1
Gas grill (Type 860-...)
DE 926108
NL 954233
DE 926116 – with the raised
part at the rear
NL 942006 – with the raised
part at the rear
DE 926124 - Installation module
with control panel
SE 883902, DK 883903
See page 14 chapter 7.1
A1
10.3 kW
3
2,66 m /h
0.8 kg/h
3
1.09 m /h
G 1/2 A
Gas lava stone grill
(Type 860-...)
DE 937789
DE 937797 – with the raised
part at the rear
DE 937800 - Installation module
with control panel
SE 883904, DK 883906
See page 14 chapter 7.1
A1
10.3 kW
3
2,66 m /h
0.8 kg/h
3
1.09 m /h
G 1/2 A
en
27 / 76