Removing Packaging - Gaggenau BMP250710 Notice De Montage

en-us
Preparing Kitchen Units
Ventilation requirements
Ventilation cut-out in the built-in cupboard's
▯
intermediate shelf: at least 1¾ in to 1.65 ft
(45 x 500 mm).
Ensure that air can circulate behind the appliance by
▯
maintaining a minimum distance of 1¾ in (45 mm)
between the furniture's backwall and the wall.
Outlet Area
The outlet can be located anywhere within the shaded
area. Anywhere within the shaded area, the minimal
distance between the appliance and the wall is 1¾ in
(45 mm).
10

Removing Packaging

NOTICE
To prevent damage to your floor keep the unit in its
packaging base until ready to be placed in the cabinet
opening. Do not slide the unit across the flooring.
Different models use different packaging materials.
Actual brackets may look differently. Bracket remains in
packaging base.
1. Cut straps on outside of box.
Remove cardboard box.
2.
3. Remove all top and side cardboard and Styrofoam
braces.
4. Place microwave oven in front of cabinets where it is
to be installed.