Connecting The Transmitter - Amplicomms TV SoundBox Mode D'emploi

G
ETTING STARTED
Getting started
Important: please make sure you've read the safety information on page
24 before you set up your device.

Connecting the transmitter

1 Place the transmitter near to the audio source on a non-slipping surface.
2 Connect the power adapter to the DC IN input socket located on the
transmitter rear panel.
3 Connect the power adapter provided to an electrical outlet.
4 Connect the transmitter to your audio source.
For connecting to a headphone jack please refer to the upper figure.
For connecting to an audio output please refer to the lower figure.
The power indicator LED will be on as soon as you have connected the power
adapter to the electrical outlet.
16
Helpline UK 0844 800 6503
(See page 26 for costs and hours of operation)