Installation And Connection - Miele professional K 60 Notice De Montage

^ It should be unplugged or discon-
nected from the mains electricity sup-
ply by a competent person.
For wall mounting the DOS module two
screws (4.8 x 32) and two plugs (8 mm)
are included with the unit.
Dimensions:

Installation and connection

^ Mount the module in a suitable posi-
tion on the wall.
^ Remove the blue caps from the
hoses.
The DOS module hoses are fitted with
blue caps to ensure they remain sealed
during transportation.
^ Connect the hoses to the dispensing
siphon and the dispensing connec-
tions.
^ Connect to the mains electricity
supply.
The connections for the mains cable
and dispenser hose are on the back of
the machine (see following pages).
^ Adjust the position of the cap along
the siphon tube so that the tube will
reach the bottom of the container.
^ Fill the storage container with the rel-
evant agent, feed the siphon tube
into the container and tighten the cap
securely.
DOS-Module venting and dispensing
instructions are given in the Operating
Instruction booklet for the machine.
7