Search Buttons 21 (Remote Only); Pause Button 9; Stop Button 8; Track Skip Buttons 10 - Rotel RCC-955 Manuel De L'utilisateur

Pause Button
9 20
Press the Pause Button to temporarily stop playing the disc. Press
the Pause Button again, or the Play Button, to resume playing the
disc at the same track and time.
Stop Button
8 24
Press the Stop Button to stop playing the disc. The disc will re-
main selected but the track selection will go back to track 1.
Track Skip Buttons
10
When a disc is not playing:
• Press the button to select the next track on the disc. Press
and hold the button to advance more than one track on the
disc.
• Press the button to select the previous track on the disc.
Press and hold the
on the disc.
When a disc is playing:
• Press the button to skip the rest of track being played and
begin playing at the beginning of the next track on the disc.
Press and hold the
on the disc.
• Press the button to return to the beginning of the track be-
ing played. Press and hold the
one track on the disc.

Track Selection Buttons

To select a specific track on a disc, press the corresponding Track
Selection buttons. The selected track immediately begins playing.
To select tracks higher than number 10 use the ">10" button. For
example, to select track 17, press the ">10" button then the "7"
button. Note: When the RCC-955 is in Programmed Play mode, the
Track Selection buttons are used to select tracks to be added to
the program. See the Programmed Disc Play section.
Search Buttons

(remote only)

21
Press and hold the or
the forward or reverse direction. For the first five seconds the
search speed will be approximately four times normal playing
speed. After three seconds the search speed will increase to ap-
proximately 20 times normal playing speed. The sound volume is
reduced while the search function is being used. The search func-
tion may be used when disc play has been temporarily stopped
with the Pause function, however no sound is heard. The Search
function will not go past the beginning or end of the selected disc.
18
button to go back more than one track
button to advance more than one track
button to go back more than
(remote only)
26
buttons to quickly search a disc in
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Display Panel
4
The Disc Indicators shows the positions in the Disc Tray that
have discs in them.
The Play Indicator is lit whenever a disc is playing.
The Pause Indicator is lit when disc play has been temporarily
stopped with the Pause button.
The Disc Selection Indicator
disc currently selected. If the Remaining Disc Playing Time display
option has been selected the Disc Selection Indicator changes to
a "–". See the Time Display section.
The Track Indicator shows either the track that is selected,
the total number of tracks on the disc, or the number of tracks that
remain on the disc. See the Time Button section.
One of the Repeat Play Mode Indicators
repeat play options has been selected. See the Repeat Play But-
ton section for more information.
The Random Play Indicator
options is being used. See the Random Play section.
The Program Play Indicator
gramming function is activated. See the Programed Play Section.
The Intro Scan Indicator
activated. See the Intro Scan section.
The Remaining Time Indicator
tive time display functions is activated. See the Time Display Sec-
tion.
The Time Display shows either the total playing time of the
disc that is selected, the amount of time the current track has
been playing, the remaining playing time of the current track, or
the remaining time of the disc that is playing. See the Time Button
section.
Track Calendar Display
the disc that is playing and the track that is currently playing. If
the selected disc has more than 16 tracks the Additional Track In-
dicator is lit.
When a disc is selected, the Track Calendar Display shows the to-
tal number of tracks on the disc. The number of the track that is
playing flashes. After a track is played the number for that track is
turned off. If there are more than 16 tracks on the disc after track
16 is played the indicator flashes. The Track Indicator shows
number of the track being played, or the number of tracks remain-
ing, depending on the Time Display mode selected.
When programmed tracks are played, only the number(s) of the
programmed track(s) are illuminated. The number of the track that
is playing flashes, and is turned off after the track is played. See
the Programmed Play section.
English
typically shows the number of the
will light if one of the
is lit when one of the random play
lights whenever the track pro-
is lit when the Intro Scan feature is
lights when one of the alterna-
shows the total number of tracks on
9