Intro Scan Button; Remote Only); Programmed Disc Play; Program Button - Rotel RCC-955 Manuel De L'utilisateur

If the Track Skip Forward button
playing and Random Play is turned on, another track is immedi-
ately randomly selected. If the Track Skip Back button
pressed when a disc is playing and Random Play is turned on, the
same track begins playing from the beginning.
The Search Forward button
Play is turned on. If you search forward to the end of a track an-
other track is randomly selected. The Search Reverse button
will allow you to search back to the beginning of the track that is
playing.
Random Play can be used in conjunction with Programmed Play. If
Random Play is turned on after a set of tracks has been pro-
gramed, the programmed tracks are played in random order. Note:
In order to use these two together the Random Play must be
turned on after tracks have been programmed. If Random Play is
turned on the Programmed Play feature cannot be selected.
If the Repeat 1 Track or Repeat 1 Disc feature is on, it is deacti-
vated when Random Play is turned on. The Random Play and Re-
peat All Discs features may be used together.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Intro Scan Button

The Intro Scan feature lets you listen to a short section of the be-
ginning of musical tracks. Press the Scan button to turn on the
Intro Scan feature. Press the Scan button again, or the Stop but-
ton, to turn Intro Scan off. When the Intro Scan feature is active
the Intro indicator in the display is lit.
If Programmed Play is not being used, the first 10 seconds of each
track on each loaded disc is played in sequence, beginning with
the currently selected track. After the first 10 seconds of the last
track on disc 5 is played, Intro Scan playing stops. If Programmed
Play is being used, the first 10 seconds of each programmed track
is played, beginning with the currently selected programmed
track. After the first 10 seconds of the last programmed track is
played, Intro Scan playing stops.
If Intro Scan is turned on when a disc is not playing, scanning be-
gins with the track that is selected. If a disc is playing when Intro
Scan is turned on, the RCC-955 skips to the next track, plays the
first 10 seconds of that track, and each of the following tracks.
There is one exception - if Intro Scan is turned while the first 10
seconds of a track is playing. In that instance the remainder of the
first 10 seconds of that track is played. The RCC-955 then skips to
the beginning of the next track and continues scanning.
is pressed when a disc is
is
functions normally when Random

(remote only)

29
The Intro Scan feature is interactive with Random Play, Pro-
grammed Play and Repeat Play. Such combined functions will
rarely be used. For example, if both Intro Scan and Repeat Play/All
are turned on, the first ten seconds of each disc is played continu-
ally in sequence. If both Intro Scan and Random Play are turned
on, the first ten seconds of randomly selected tracks are played. If
Intro Scan and Programmed Play are active, the first ten seconds
of each programmed track are played in sequence. If Repeat Play-
ing/All is also active the first ten seconds of each programmed
track are played in sequence continually. Other combinations of
functions are possible, but again are unlikely to be used.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Programmed Disc Play

Up to 32 tracks, on any of the loaded discs, can be in selected for
playback. After a group of tracks have been programmed, they are
played back in the programmed order. All programming and pro-
grammed play functions are done with the remote control.

Program Button

30
The Program Button is used to turn the Programmed Play feature
on and off. When Programmed Play is turned on the Program Play
Indicator in the display is lit.
Once a group of tracks have been programmed, only those tracks
may be played until the Programmed Play feature is turned off.
Press the Program Button to turn off Programmed Play, clear the
programmed tracks and return to normal play mode. Programmed
tracks are also cleared when the Disc Tray is opened and when
the power is turned off.

Track Programming

Programming While a Disc is Playing
Press the Program Play button
the display lights. The track that is playing when the Program But-
ton is pressed becomes the first programmed selection. The Time
display briefly displays "P-01" indicating the track is now pro-
gramed selection 1. If the second track you want to add to the
program list is on the same disc, use the Track Selection buttons
to select the next track. If the second track you want to add
26
to the program list is on a different disc, use the Disc Selection
buttons to select the next disc. The Track and Time displays
25
change to indicate another selection is being made. The Time dis-
play briefly displays "P-02" indicating the track is now pro-
gramed selection 2. Continue selecting new discs (if necessary)
and tracks until you have programmed all the tracks you want.
Then press the Play button to begin playing the programmed
tracks.
English
, the Program Indicator
30
in
11