Light Control; Music Control - LEXIBOOK Decotech BTL030 Mode D'emploi

Bluetooth
1. To activate auto-detection of a nearby device, long press the
hear a sound. The blue LED indicator will start blinking.
2. Activate the Bluetooth function on your smartphone or other Bluetooth enabled
device. In the Bluetooth menu of your device, "BTL030" should appear. Select
it to start pairing to the lamp.
3. Once pairing is successful, a "Beep" sound will come out from the speaker and
the LED light will glow steadily. You can short press the
track buttons to control your music.
4. To stop the connection with the speaker, press and hold the
disconnection or press the button from your personal device.
Notes :
• If your Bluetooth device requires a password, the default password is 0000.
• Some music players do not fully support Bluetooth audio controls. Play/pause,
previous and next buttons on the Bluetooth speaker may not respond.
The music player may also turn off. To get the best control experience in the said
player, use the on-screen track controls of your music player rather than those on
the speaker.
AUX IN
You can also broadcast your music using the AUX IN cable provided:
1. Long press the
blinking.
2. Insert one end of the AUX IN cable (included) into your audio device and the
other end into the AUX IN jack (8) on the rear of the lamp.
Note: When the speaker is in AUX IN mode, the volume down/up, previous and
next track buttons on the speaker are disabled. Please use the control buttons on
your music player to control your music.
BTL030IM1317_101_V11.indd 8

LIGHT CONTROL

1. Short press
the LED panel on and off and choose
among 3 brightness levels (30%, 70%
and 100%).
2. Long press
the base on and off.

MUSIC CONTROL

(1) to activate the Bluetooth. The blue LED indicator will start
8
(6) successively to turn
(6) to turn the night light of
(1) until you
, / and /
(1) juntil
4/8/17 3:43 pm