Before Use; Cautions Regarding Handling; Safety Instructions - JB Systems CD200 Mode D'emploi

ENGLISH
OPERATION MANUAL
FEATURES
Digital scratch effect via jog wheel
4 Hot Cue buttons can hold cue points and loops!
Pitch Lock (Master Tempo)
Anti-shock memory 10sec.
Pitch ranges: +/-4% +/-8% +/-16% +/-100%
Pitch bend on jog wheel and buttons for perfect mixes
Up to 4 Seamless loops for every track with reloop/stutter
Permanent memory for up to 2048 (512 x 4) Cue points and loops
Real-time cue ("Cue on the fly")
Ultra fast memory start within 10msec
Fader start, fader stop, (back cue),
Auto cue function(-48dB)
1/75 Frame search
4 different speed scan
Blue LCD display with pitch display and position marker
Selectable elapsed, remain and total remain time display
Jog wheel with special rubber surface
Single/continuous play
Relay play allows consecutive playback on two decks
S/PDIF digital audio RCA coaxial
60 seconds Transport Protection
Sleep mode (saves the life span of the laser)

BEFORE USE

Check the contents:
Check that the carton contains the following items:
CD200 unit
User manual
1 cinch/cinch cable
1 mono mini-DIN cable for fader start and relay play
JB SYSTEMS®
USER MANUAL
1/52 CD200
ENGLISH

CAUTIONS REGARDING HANDLING

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric
CAUTION
shock, do not remove any cover. No user-
serviceable parts inside. Refer servicing to
qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the
user to the presence of important operation and maintenance (servicing)
instructions in the literature accompanying this appliance.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Do not place metal objects or spill liquid inside the unit. Electric shock or malfunction
may result.
INSTALLATION GUIDELINES:
• Placing and using the unit for long periods near heat-generating sources such as
amplifiers, spotlights, etc. will affect its performance and may even damage the
unit.
• Take care to minimize shocks and vibrations during transport.
• When installed in a booth or flight case, please make sure to have good
ventilation to improve heat evacuation of the unit.
• To avoid condensation to be formed inside, allow the unit to adapt to the
surrounding temperatures when bringing it into a warm room after transport.
Condense sometimes prevents the unit from working at full performance.
• Choose the place where you put your installation very carefully. Avoid presence
of heat sources. Avoid places with vibrations or places that are dusty and humid.
• The player will work normally when installed on a surface with max. 15°
inclination.
• Be very careful while handling CDs, do not touch them with wet or dirty hands.
• Discs that are dirty must be cleaned with special designed cloth and cleaning
products.
• Do not use CDs that are badly damaged (scratched or deformed) they can
damage your appliance.
• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
• In order to prevent electric shock, do not open the top cover. If a problem occurs,
contact your dealer.
• Do not place metal objects or spill liquid inside the CD player. Electric shock or
malfunction may result.
• This CD player uses the semiconductor laser. To allow you to enjoy music at a
stable operation, it is recommended to use this in a room of 5°C – 35°C.
• The compact disc player should not be adjusted or repaired by anyone except
properly qualified service personnel.
• This unit may cause interference to radio and television reception.
JB SYSTEMS®
USER MANUAL
2/52 CD200