DOOR REVERSAL
INSTRUCTIONS
If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes have
already been prepared in the factory.
Cleaning
To clean the inside, use a soft cloth and a mixture of one tablespoon of baking soda to one quart of water.
Other cleaning options are a mild soap suds solution, or mild detergent. Wash shelves in a mild detergent
solution, then dry and wipe with a soft cloth. Clean the outside with a soft damp cloth and some mild
detergent or appliance cleaner.
Vacation Time
For short vacation periods, leave the control knob at its normal setting. During longer absences,
(a) remove all foods.
(b) disconnect power cord from electrical outlet.
(c) clean the refrigerator thoroughly, including drip tray (defrost pan), located on the bottom of the unit.
(d) leave door open to avoid possible formations of condensate, mold or odors.
Power Failure
Most power failures are corrected within an hour or two and will not affect your refrigerator temperatures.
However, you should minimize the number of door openings while the power is off. During power failures of
longer duration, take steps to protect your food by placing dry ice on top of packages.
If You Move
Remove or securely fasten down all loose items inside the refrigerator. To avoid damaging the leveling legs,
turn them all the way into the base.
Some Important Rules for the Correct Use of the Refrigerator:
• Never place hot foods in the unit.
• Never place spoiled foods in the unit.
• Don't overload the unit.
• Don't open the door unless necessary.
• Should the refrigerator be stored without use for long periods, it is suggested, after a careful cleaning, to
leave the door ajar to allow the air to circulate inside the cabinet in order to avoid the possibility of
condensation, mold or odors.
INSTALLATION INSTRUCTIONS
CAUTION: To avoid personal injury to yourself and/or property, we
recommend someone assist you during the door reversal process.
CARE AND CLEANING
3