General Information - Obsolete 54 Mode D'emploi

1. General information

1. General information
The combined bimetal thermometer described in these operating
■
GB
instructions has been designed and manufactured using state-of-
the-art technology. All components are subject to stringent quality
and environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on
■
handling the combined bimetal thermometer. Working safely requires
that all safety instructions and work instructions are observed.
Observe the local accident prevention regulations and
■
general safety regulations, in effect for the combined bimetal
thermometer's range of use.
The operating instructions are part of the product and must be kept
■
in the immediate vicinity of the combined bimetal thermometer and
readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage
■
caused by using the product contrary to its intended use,
non-compliance with these operating instructions, assignment
of insufficiently qualified skilled personnel or unauthorised
modifications to the combined bimetal thermometer.
The general terms and conditions contained in the sales
■
documentation shall apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
4
www.wika.de / www.wika.com
TV 15.01
WIKA operating instructions model 54, Twin-Temp