Replacing Carbon Brushes; Accessories - Makita 2414NB Manuel D'instruction

Workpiece
shape
Cutting
angle
115mm (4-1/2")
90˚
45˚ 115mm (4-1/2")
Carrying tool
Fold down the tool head to the position where you can
attach the chain to the hook on the handle.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.

Replacing carbon brushes

Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
119mm (4-11/16")
106 mm (4-3/16") 115 mm × 103 mm (4-1/2" × 4-1/16") 100 mm (3-15/16")
003768
001145
1. Limit mark
1
115mm × 130 mm (4-1/2" × 5-1/8")
102 mm × 194 mm (4" × 7-5/8")
70 mm × 233 mm (2-3/4" × 9-1/8")
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.

ACCESSORIES

CAUTION:
• These accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Abrasive cut-off wheels
• Socket wrench 17
7
003787
137 mm (5-3/8")
003769
1. Screwdriver
2. Brush holder
1
cap
2
or attachments
Only use accessory
are
or