Ordering Spare Parts; Maintenance And Cleaning; Battery Disposal - EINHELL NEW GENERATION NLW 90/2 Mode D'emploi

Anleitung NLW 90-2 SPK1
On the back of the base for rough surfaces there is
also a permanent magnet so that the base can also
be fastened to magnetizable surfaces.
Important! Do not grip the back of the base for
rough surfaces when the control and lock
buttons are pressed.
Risk of injury!
Important! The base for rough surfaces is
suitable only for soft wood, walls made of
plasterboard and similar materials, and
magnetizable surfaces. Do not use the base on
any other surfaces!

7. Maintenance and cleaning

Keep the unit dry and clean at all times. Use a soft,
damp rag to wipe off dirt marks. Do not use any
aggressive cleaning agents or solvents. Clean the
laser beam outlet at regular intervals with a cotton
wad.

8. Battery disposal

Batteries contain materials that are potentially
harmful to the environment. Never place batteries in
your household refuse, in fire or in water. Batteries
should be collected, recycled or disposed of by
environment-friendly means. Send your old batteries
to ISC GmbH, Eschenstrasse 6 in D-94405 Landau.
You can then be sure that the equipment will be
correctly disposed of by the manufacturer.
!
08.09.2006 10:17 Uhr Seite 7

9. Ordering spare parts

Please provide the following information on all orders
for spare parts:
Model/type of tool
Article number of the tool
ID number of the device
Spare part number of the part to be replaced
For our latest prices and information please go to
www.isc-gmbh.info
iNTERNATiONALES SERViCE CENTER GmbH
GB
7