Assembly And Installation - Haier HPY08XCM Guide D'utilisation Et D'entretien

AssEMblY AnD instAllAtion

1. Depending on your window opening, use 1, 2 or 3 of the window extension panels. Insert
screw(s) through holes on center panel as necessary to secure the panel(s).
2. Open the window and place the window panel assembly into the window. Adjust the extension
panels to fit the width or height of the window as shown below (see figure A). Secure the
extension panels using 2 blunt tip screws (see figure b). Close window.
3. Secure the bracket to the window with remaining screw. This prevents the window from being
opened from the outside (see figure C).
PAgE 6
A
b
C