Intended Use - Perel PHG2 Mode D'emploi

•
Keep this manual for future reference.
4. Features
•
2 heat settings
•
included accessories:
4 nozzles
o
scraper
o
scraper hook
o
putty knife
o
5. Overview
Refer to the illustrations on page 2 of this manual.
Heat gun
1 selector switch
2 air intake
Nozzles
A deflector nozzle
B hook nozzle
C protecting nozzle
D concentrator nozzle
6. Operation
6.1

Intended use

When observing the safety rules and using the original accessories, this hot air tool is intended for all
applications listed below:
•
Shrinking of shrink down tubing, solder connectors and solder terminals, packaging and electrical
components.
•
Deforming of articles made from acrylic, PVC, and polystyrene, tubing, plates and profiles, as well as
moist woods.
•
Welding of thermoplastic polymer, flooring materials of PVC and linoleum, PVC-coated fabric,
tarpaulins and foils.
•
Soldering of tin, special silver solder, SMD elements, cable lugs, and for loosening soldered
connections.
•
Paint removal: removal of old and even thick coatings of oil paint, varnish and synthetic plaster.
•
Drying of colour shade samples, filter, adhesives, construction joints and stucco forms.
•
Joining adhesives: large-surface gluing with contact adhesives, activation of pressure-sensitive
adhesives, acceleration of bonding processes, releasing of bonding points as well as releasing or
bonding of edge bond.
•
Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for
defrosting refrigerators and ice boxes.
•
Disinfection: with hot air of 600°C, you can quickly rid animal sties/stables of bacteria. Woodworm
infestation can be controlled (Caution: danger of fire! Do not heat up the wooden surface
excessively).
Switching on
•
Set the switch to I or II, depending on the application.
V. 01 – 16/05/2014
PHG2
3 hot air outlet
4 power cord
Creates a narrow heat beam, ideal when removing
paint or varnish from large flat surfaces.
Disperses the heat flow around the work peace,
ideal for defrosting metal pipes, bending pipes...
Deflects the heat away from a sensitive surface
e.g. a glass window.
Creates a concentrated heat flow, ideal for paint
removing from small corners, mouldings...
6 ©Velleman nv