Electrical Connection - BOMANN WA-921 Notice D'emploi

2.3 - Levelling
For the appliance to work under optimum conditions, it needs to be levelled
perfectly, i.e.horizontal and stable.

2.4 -Electrical connection

Before connecting the washing machine to the power supply, the following
points should be checked through:
That the power supply, is single-fhase 230 V ~ (230-240 ~ for UK).
The manufacturer declines all responsibility for any accidents on ocurrences
caused by a defective earth connection or lack thereof.
NOTE: If the power supply cable is damaged, it should be substituted by a
specially prepared replacement cable, to be supplied by the manufacturer, or by
the off icial after salesTechnical Service Organisation.
2 0
Once the machine has been positioned in ist
place, work the adjustable feet "I" at the front of
the washing machine, until it is horizontal and
the four feet are resting f irmly on the floor.
Once the levelling is done, block the adjustable
J
feet by tightening the nut "J".
In order to prevent noise and vibration, ensure
that the machine is not touching any nearby walls
or furniture.
I
Make periodic checks that the machine is levelled
by repeating these operations if necessar y.
That the user's meter, limiter, fuses, power socket
and installation are of an adequate output for the
power indicated on the characteristics plate of
this washing machine.
10 A 250 V fuse (13 A 250 V for UK).
Use a wall socket with an earth connection.
The wasing machine's plug guarantees the
machine's earthing.
I f t h e wa l l s o c ke t d o e s n o t h ave a n e a r t h
connection, you must connect the central earth
connection of the washing machine to good
ARTIFICIAL EARTH (consult your dealer).
THE WASHING MACHINE MUST BE WELL
EARTHED.
6 I