Connecting To The Network - Epson OT-WL02 Manuel D'utilisation

Connecting to the Network

For how to connect the TM printer to the network with this product, see the
OT-WL02 Technical Reference Guide.
The OT-WL02 Technical Reference Guide can be downloaded from the
following URL:
http://www.epson-biz.com/?prd=ot-wl02&inf=trg
Reading the Wireless LAN Indicator
The position of the wireless LAN indicator is shown in the illustration below.
Wireless LAN indicator
: Flashing
Status
The wireless LAN unit is not connected to the
printer. Or the printer power is OFF.
This wireless LAN unit is connected to the
printer and is in operation.
This wireless LAN unit is connected to the
printer and is in operation.
This unit is communicating on a network.
An error has occurred. Turn off the printer,
reinstall the wireless LAN unit, and then turn
on the printer.
EPSON is a registered trademark of Seiko Epson Corporation.
Exceed Your Vision is a registered trademark or trademark of Seiko Epson
Corporation.
All other trademarks are the property of their respective owners and used
for identification purpose only. Product information is subject to change
without due notice.
© Seiko Epson Corporation 2015-2016. All rights reserved.
: On : Off
6
Wireless LAN Indicator
Blue
Blue
(Flashing rapidly)
Blue
(Flashing slowly)