Before Use; Safety Instructions - JB Systems Light Mju-QUASAR LASER Mode D'emploi

ENGLISH
OPERATION MANUAL
®
Thank you for buying this JB Systems
and for your own safety, please read these operating instructions very carefully before you
start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the
current European and national guidelines. Conformity has been established and the
relevant statements and documents have been deposited by the manufacturer.
 This device was designed to produce decorative effect lighting and is used in light show
systems.
Fantastic laserburst effect using a 532nm 40mW green and 650nm 100mW red laser

Thanks to special grating technology the beams are split-up in a lot of separate laser

beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.

The color of the beams changes all the time using laser blanking technology.

Plug & play: no expensive controllers needed!

A multifunctional infrared remote can be used to control the functions

Standalone mode with built-in microphone or automatic shows can be selected.

 3 user modes: manual, auto random and sound activated.
All kinds of strobe effects

Adjustable mounting bracket (stand) and power adapter included.

Key actuated on/off switch for additional safety

Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety


BEFORE USE

Before you start using this unit, please check if there's no transportation damage. Should

there be any, do not use the device and consult your dealer first.
Important: This device left our factory in perfect condition and well packaged. It is

absolutely necessary for the user to strictly follow the safety instructions and warnings in
this user manual. Any damage caused by mishandling is not subject to warranty. The
dealer will not accept responsibility for any resulting defects or problems caused by
disregarding this user manual.
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to

add this user manual.
Check the contents:
Check that the cardboard box contains the following items:
µ-QUASAR LASER

IR remote control

2 keys (for key switch)

 Power supply
Base plate

Fixation arm

Operating instructions

JB SYSTEMS
®
USER MANUAL
product. To take full advantage of all possibilities
1/35 µ-STAR & µ-QUASAR LASER
ENGLISH

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not
remove the top cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel
only.
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user
to the presence of important operation and maintenance (servicing) instructions
in the literature accompanying this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol determines: the minimum distance from lighted objects. The
minimum distance between light-output and the illuminated surface must be
more than 1 meter
The device is not suitable for direct mounting on normally flammable surfaces.
(suitable only for mounting on non-combustible surfaces)
To protect the environment, please try to recycle the packing material as much as

possible.
 A new light effect sometimes causes some unwanted smoke and/or smell. This is normal
and disappears after some minutes.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

To avoid condensation to be formed inside, allow the unit to adapt to the surrounding

temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance or may even cause damages.
This unit is for indoor use only.

Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may

result. If a foreign object enters the unit, immediately disconnect the mains power.
Locate the fixture in a well ventilated spot, away from any flammable materials and/or

liquids. The fixture must be fixed at least 50cm from surrounding walls.
Don't cover any ventilation openings as this may result in overheating.

Prevent use in dusty environments and clean the unit regularly.

Keep the unit away from children.

Inexperienced persons should not operate this device.

The safe ambient temperature is between 15° & 40°C. Don't use this unit at higher

ambient temperatures.
Make sure the area below the installation place is free from unwanted persons during

rigging, de-rigging and servicing.
Always unplug the unit when it is not used for a longer time or before replacing the bulb

or start servicing.
The electrical installation should be carried out by qualified personal only, according to

the regulations for electrical and mechanical safety in your country.
Check that the available voltage is not higher than the one stated on the rear panel of the

unit.
JB SYSTEMS
®
USER MANUAL
2/35 µ-STAR & µ-QUASAR LASER