Examples Of Connections - Kenwood KSC-WD250T Mode D'emploi

Examples of Connections

Caution: ––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Under any circumstances, never apply inputs to the terminals A and B
simultaneously.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
■ General connection
• If there is no power control
terminal in the center unit,
connect the blue/white wire to
the accessory line (ignition key
switch ACC position line).
Car fuse box
Ignition key
switch
Car fuse box
(Main fuse)
Battery
■ Connection to center unit with non-fader (subwoofer control)
• If there is no power control
terminal in the center unit,
connect the blue/white wire to
the accessory line (ignition key
switch ACC position line).
Car fuse box
Ignition key
switch
Car fuse box
(Main fuse)
Battery
4 English
CENTER UNIT
Purple
Purple / Black
Green
Green / Black
To the power control
terminal
Blue / white
Fuse 5A × 2
Yellow
Black
Caution
• Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of
the vehicle. Turning the power ON without connecting this terminal is linked to damage of the
stereo system. Be sure to connect it.
Also, painted metal panels etc., are not grounded and will not function correctly. Be careful.
CENTER UNIT
SUBWOOFER OUT
To the power control
terminal
Blue / white
Unused terminal
Cover unused terminals with insulation
tape to avoid short circuits.
Fuse 5A × 2
Yellow
Black
Caution
• Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of
the vehicle. Turning the power ON without connecting this terminal is linked to damage of the
stereo system. Be sure to connect it.
Also, painted metal panels etc., are not grounded and will not function correctly. Be careful.
REAR REAR
SP. L SP. R
INPUT INPUT
RCA cord
( Commercially
available parts)
10-pin connector cord
• If buzzing noise is heard from
the speakers when the engine is
running, attach a line noise filter
(sold separately) to the power
lead.
10-pin connector cord
• If buzzing noise is heard from
the speakers when the engine is
running, attach a line noise filter
(sold separately) to the power
lead.