General Power Tool Safety Warnings - Scheppach AB1600 Traduction Des Instructions D'origine

Persons who operate and maintain the ma-
chine must be familiar with the manual and
must be informed about potential dangers.
In addition, the applicable accident preven-
tion regulations must be strictly observed.
Other general occupational health and
safety-related rules and regulations must
be observed.
The liability of the manufacturer and result-
ing damages are excluded in the event of
modifications of the machine.
Please note that our equipment has not
been designed for use in commercial, trade
or industrial applications. Our warranty will
be voided if the equipment is used in com-
mercial, trade or industrial businesses or
for equivalent purposes.
General Power Tool
Safety Warnings
Attention! The following basic safety
measures must be observed when using
electric tools for protection against electric
shock, and the risk of injury and fire. Read
all these notices before using the electric
tool and keep the safety instructions for lat-
er reference.
1. Work area safety
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
24 GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
b) Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for
outdoor use reduces the risk of elec-
tric shock.