Cooper Lighting Solutions Metalux CGTSURF24 Instructions D'installation page 5

C. Instructions for Suspending Surface Mount Box
using Suspension Kit (sold separately)
C1. Insert L- brackets into the slot on each side of one
of the long rails. (Figure 17.)
Figure 17.
C2. Join the long rail with the short rails by inserting
the protruding leg of each L- bracket into the
corresponding slot on the short rail. Use 4 of the
included screws to secure the short rails to the long
rail. (Figure 18.)
Screws may strip if over torqued.
N ote:
Figure 18.
Installation Instructions – CGTSURF24
C3. Slide the fixture completely into the channel through
the open side. (Figure 19.)
Figure 19.
C4. Install the remaining long rail, L- brackets and
screws. (Figure 20.)
Screws may strip if over torqued.
N ote:
Figure 20.
C5. Follow instructions included with suspension kit to
complete installation of the fixture.
COOPER LIGHTING SOLUTIONS IB519118EN Installation instructions
5