Cooper Lighting Solutions Metalux CGTSURF22 Instructions D'installation page 3

A6. Unscrew and remove the type "B" rail that is not
attached to the surface, as well as the L- brackets,
and retain for reuse. (Figure 6.)
Figure 6.
A7. Use flexible metal conduit with 90-degree conduit
fittings to bring supply conductors into the wiring
compartment on the back of the fixture. Wire
according to instructions included with the fixture.
(Figure 7.)
Figure 7.
A8. Slide the fixture completely into the channel through
the open side. (Figure 8.)
Figure 8.
Installation Instructions – CGTSURF22 and CGTSURF14
A9. Reinstall the floating type "B" rail, L- brackets and
screws, and affix the included labels to the floating
type "B" rail next to each pair of screws.
(Figures 9 and 10.)
N Screws may strip if over torqued.
ote:
Figure 9.
Figure 10.
B. Instructions for Wall Mount, Horizontal
Orientation
B1. Follow steps A1 - A3 above to assemble box.
B2. Locate box on the wall and mark mounting holes.
N It is recommended to mount the box such that the
ote:
supply conductor junction box is located at one end
of the box. This will ensure there is enough free space
inside the box for excess flexible metal conduit.
(Figure 11.)
Type "B" Rail on the
Bottom
Figure 11.
COOPER LIGHTING SOLUTIONS IB519117EN Installation instructions
3